Cretestone

Home Tile Grout And Industrial Grout

Tile Grout And Industrial Grout

About Tile Grout And Industrial Grout Products

READY TO USE GROUT

STONE GROUT HYBRID

Single component, ready to use, UV resist ant grout for interior & exterior floor & wall
Working Properties : Table :
Pot life= 4 Hours
Foot traffic =24 hours
Heavy traffic =14 Days.

Advantages:

  • Single component, easy to use and clean.
  • UV Stable and Flexible. Used for exteriors and interiors
  • Colour fast
  • No odor during application.
  • Chemical and Temperature resistant
  • Non-cracking or powdering
  • Complies with ANSI A 118.3, EN 13888, standards.
  • Water and shock resistant, Highly durable
  • Food grade – Certified by CFTRI, Mysore

Substrates:

  • Ceramic tile
  • Vitrified tile
  • Glass Mosaic Tiles
  • Granite
  • Marble
  • Metal tiles
  • Agglomerates (Engineered Stones)
  • Precast Terrazzo tiles
  • Clay tiles, Terracotta tiles

TILE JOINT EPOXY GROUT

CRETOXY 5000

Highly chemical resistant Industrial grade epoxy grout
Pot life =40 minutes
Foot traffic =12 hours
Heavy traffic =48 hours

Advantages:

  • Anti-bacterial and Anti-fungal
  • High temperature resistance & Steam cleanable
  • Water cleanable when fresh
  • High resistance to most acids, corrosives and solvents
  • Fast Curing, ready for traffic in 12 to 14 hours
  • Complies to EN/ISO with a R2 classification.
  • Complies with ANSI A 118.3, EN 13888, standards.
  • Water and shock resistant.
  • Meets USDA & USFDA requirements.

Substrates:

  • Parking tiles
  • Vitrified tile
  • Paver tiles
  • Granite
  • Marble
  • Metal tiles
  • Agglomerates (Engineered Stones)
  • Precast Terrazzo tiles & Floor Bricks

CRETOXY HP100

CRETOXY HP 100 is based on Epoxy grout for interior & covered exterior floor & wall
Pot life =45 minutes
Foot traffic= 24 hours
Heavy traffic= 72 hour

  • Stain-free
  • Colour fast
  • Easy to clean
  • Chemical and Temperature resistant
  • Complies with ANSI A 118.3, EN 13888, standards.
  • Water and shock resistant.
  • Food grade – Certified by CFTRI, Mysore

Substrates:

  • Ceramic tile
  • Vitrified tile
  • Glass Mosaic Tiles
  • Granite
  • Marble
  • Metal tiles
  • Agglomerates (Engineered Stones)
  • Precast Terrazzo tiles

CRETOXY TWINKLE

Epoxy Dazzle Grout for interior & covered exterior floor & wall
Pot life =45 minutes
Foot traffic= 24 hours
Heavy traffic= 72 hour

Substrates:

  • Ceramic tile
  • Vitrified tile / Porcelain tile
  • Glass Mosaic Tiles
  • Granite
  • Marble
  • Metal tiles
  • Agglomerates (Engineered Stones)
  • Precast Terrazzo tiles

TILE JOINT CEMENT GROUT

STONE FILL CEM

STONE FILL CEM Series Unsanded Grout.Also for use when grouting narrow joints 1- 3mm soft bisque glazed wall tile, non-vitreous clay tile or marble.
Pot Life= 1 hour

FEATURES AND BENEFITS:

  • Colour-fast
  • Weather resistant
  • Easy maintenance
  • Non-shrinking
  • Non-cracking
  • Easy application and clean up
  • Available in range of attractive colors
  • No wet curing required when with latex

Substrates:

  • Ceramic tile
  • Vitrified tile
  • Glass Mosaic Tiles
  • Granite
  • Marble
  • Agglomerates (Engineered Stones)
  • Precast Terrazzo tiles
  • Bricks

TILE JOINT SANDED GROUT

STONE FILL SANDED

Polymer based, sanded cement grout for interior & exterior, floor & wall joints of width 3mm – 12mm
Pot life =60 minutes
Foot traffic =24 hours
Heavy traffic =72 hours

FEATURES AND BENEFITS:

  • Weather resistant
  • Colour fast
  • Easy application and clean up.
  • Easy maintenance
  • Non-cracking & Non-shrink
  • Complies with ANSI A 118.6, EN 13888, standards.
  • Water and shock resistant.

Substrates:

  • Ceramic tile
  • Vitrified tile
  • Glass Mosaic Tiles
  • Granite
  • Marble
  • Agglomerates (Engineered Stones)
  • Precast Terrazzo tiles
  • Bricks

TILE JOINT WATER REPELLANT GROUT

STONE FILL AQUA

Polymer based powder water repellent grout. STONE FILL AQUA is a single part high degree of hardness, calibrated and smooth finish that is suitable for high resistance grouting from 1 mm to 12 mm on all horizontal and vertical surfaces with complete range of tiles and stone. It is thixotropic.
Apperance= White
Foot traffic=12 – 24 hours
Joint Width=1-12 mm Pot Life @ 350 ± 20=30 Minutes
Cure @ 350 ± 20=24 Hours
Mineralogical nature of inert material =Crystalline Carbonate

Advantages:

  • Easy to clean and maintain.
  • High-performance grouting, from 0 to 5 mm, with extra-fine finish, high degree of hardness and reduced water absorption.
  • Natural bacteriostatic and fungistatic.
  • ingle-component with very low volatile organic compound emissions,contains recycled raw materials
  • Stabilized mineral grout containing pure NHL (Natural Hydraulic Lime) 5 for extremely colour-fast joints from 0 mm to 5 mm

Substrates:

  • Floors and walls, for internal and external use.
  • For environments subject to heavy traffic, For internal and external use.
  • Ideal for decorating corrected slabs.
  • In domestic, commercial and industrial applications.
  • Suitable for homogeneous tiles, ceramics, low thickness slabs and natural stone.
  • Swimming pools, tanks and fountains and also in areas subject to thermal shock and freezing. Water-repellent and low absorption.

FOUNDATION GROUT

STONE GROUT GP 40

STONE GROUT GP-40 is a free flow non-shrink high strength expansive
Property : Fresh wet density at flow able consistency= Approx. 2.20
Controlled Expansion in the plastic state =1-4%
Compressive strength: (BS 1881- part 116: 1983): Age/ Days> Compressive Strength in N/mm2
1 Day >10N/mm²
3 Days >20N/mm²
7 Days >30N/mm²
28 Days >40N/mm²
Flowable W/P 0.19
Flexural Strength at 300C: BS 4551/1998
Age/ Days =Strength in N/mm2
7 days= Approx. 4
28 days= Approx. 6
Tensile Strength @28 days (ASTM C 307)=3.0 N/mm2 @300C

Advantages:

  • Non-shrink: basically, a non-shrink material occupies the filled space without shrinkage
  • High Strength: High early strength is possible at very early age
  • Free flow: it has excellent flow characteristics and has positive expansion during setting
  • Chloride free: it is basically a chloride free material and does not affect the steel or foundation bolts

Uses:

  • Precision grouting
  • Grouting of base plates of turbines, compressors, boiler feed pumps
  • Anchoring for a wide range of fixings.
  • Masts, anchor bolts and fence posts.

STONE GROUT GP 50

Free Flow Non-Shrink High Strength Expansive Grout. STONE GROUT GP-50 is recommended for precision grouting
Property : Compressive strength: (BS 1881- part 116: 1983): Age/ Days> Compressive Strength in N/mm2
1 Day >15N/mm²
3 Days >30N/mm²
7 Days >40N/mm²
28 Days >50N/mm²
Flowable W/P 0.19
Flexural Strength at 300C: BS 4551/1998
Age/ Days =Strength in N/mm2
7 days= Approx. 4
28 days= Approx. 6
Tensile Strength @28 days (ASTM C 307)=3.0 N/mm2 @300C
Tensile Strength: Approx. 3.3 N/mm²@ 28 days, 30degreeC temp.
W/P: 0.18.
Controlled Expansion: 1.94 % in the plastic state
Fresh wet density: at flowable consistency: Approx. 2.25

Advantages:

  • Develops very high early and final strengths
  • Non-shrink: basically a non-shrink material occupies the filled space without shrinkage
  • Pre-packed, factory blended
  • Non-metallic Free flow: it has excellent flow characteristics and has positive expansion during setting and ensures high level contact with bond area
  • Chloride free: it is basically a chloride free material and does not affect the steel or foundation bolts

Uses:

  • Precision grouting
  • Grouting of base plates of turbines, compressors, boiler feed pumps
  • Anchoring for a wide range of fixings.
  • Masts, anchor bolts and fence posts.

STONE GROUT GP 65

Free Flow Non-Shrink High Strength Expansive Grout.STONE GROUT GP-65 is recommended for precision grouting
Property : Freshwet density=Approximately 2220 Kg/m3 depending on actual consistency used
Time for expansion
(after mixing )
Start : 20 minutes
Finish : 120 minutes
Compressive strength: (BS 1881- part 116: 1983): Age/ Days> Compressive Strength in N/mm2
1 Day >24N/mm²
3 Days >45N/mm²
7 Days >55N/mm²
28 Days >66N/mm²
Flowable W/P 0.18
Flexural Strength :(ASTM C 348)
Age/ Days =Strength in N/mm2
7 days 4N/mm²
28 days= Approx. 10N/mm²

Advantages:

  • Develops very high early and final strengths
  • Non-shrink: basically, a non-shrink
  • Excellent flow characteristics
  • Ensures high level contact with bond area
  • Chloride free
  • Does not affect the steel or foundation bolts.
  • Gaseous expansion system compensates for shrinkage and settlement in the plastic state
  • No metallic iron content to cause staining
  • Pre-packed material overcomes onsite batching variations
  • Free flow ensures high level of contact with load bearing area

Uses:

  • Precision grouting
  • Grouting of base plates of turbines, compressors, boiler feed pumps
  • Anchoring for a wide range of fixings.
  • Masts, anchor bolts and fence posts.

STONE GROUT GP 80

Heavy duties, High strength non-shrink Flow able Cementitious Grout.STONE GROUT GP-80 is a single component pre-weighed factory blended Non-shrink, high early strength free flow grout
Property : Pot Life @ 27 ºC temp: 15 minutes
Compressive Strength: Age/ Days Compressive Strength in N/mm²
W/P ratio: 0.18 (Flow able), (water curing after one day)
1 Day Approx.23
3Days Approx.53
7 days Approx.71.2
28 Days Approx.86.1
Note: Size of the cubes used 70.6mm x 70.6mm x 70.6mm tested at 30 ºC.
Age/ Days Flexural Strength in N/mm²
7 Days > 9.2
28 Days > 11.1
Tensile Strength: > 3.87 N/mm² @7 days
5.60 N/mm² @ 28 days
Unrestraint Expansion: 1.3% in plastic state.
Flow characteristics: The maximum distance of flow is governed by the gap thickness, the head of the grout applied and the ambient temperature
Yield: 13Lts at flow able consistency for 25 Kgs of HDPE bags
Flexural Strength at 30 ºC: W/P ratio: 0.15 (Flowable),(Water curing after one day)

Advantages:

  • Excellent flow characteristics
  • Low creep characteristics under sustained loading
  • High Compressive, Tensile and Flexural strengths
  • Non-shrink- and hence ensures complete surface contact
  • and bond
  • Suitable for a wide range of loading situations
  • Does not shrink or over expand
  • on-shrink- and hence ensures complete surface contact

Uses:

  • Precision grouting
  • Grouting of base plates of turbines, compressors, boiler feed pumps
  • Anchoring for a wide range of fixings.
  • Masts, anchor bolts and fence posts.

STONE GROUT GP 80 HES

Heavy duties, High early strength Non-shrink Flowable Cementitious Grout.STONE GROUT GP-80 HES is a single component pre-weighed factory blended Non-shrink, high early strength free flow grout
Property : Pot Life @ 270C temp: 15 minutes
Compressive strength: @300C
W/P ratio: approx.0.14 to 0.15 (Flowable),
Age Days =Compressive Strength (ASTM C 109)
Flowable W/P 0.15
12 Hrs @300C air curing >15N/mm²
1 Day @300C air curing >40N/mm²
3 Days @300C >60N/mm²
7 Days @300C >70N/mm²
28 Days @300C >80N/mm²
Flexural Strength@ 28 days at 30°C(ASTM C 348)= 10N/mm2
Tensile Strength @ 28 days at 30°C(ASTM C 307)= 3.5N/mm2
Controlled Expansion: ( in the plastic state)=1 – 4.0%
12.5 Lts for 25 kg one pack qty

Advantages:

  • Excellent flow characteristics
  • Low creep characteristics under sustained loading
  • High early Compressive, Tensile and Flexural strengths
  • Non-shrink- and hence ensures complete surface contact and bond
  • Suitable for a wide range of loading situations
  • Does not shrink or over expand
  • Chloride and iron free

Uses:

  • Precision grouting
  • Grouting of base plates of turbines, compressors, boiler feed pumps
  • Anchoring for a wide range of fixings.
  • Masts, anchor bolts and fence posts.
  • Applications requiring high early compressive strengths and high ultimate compressive strengths.

ANCHORE GROUT

STONE GROUT ANCH

STONE GROUT ANCH is polyester based two component resin system specially made to give excellent anchorage .
Property : Description =Two components preweight system
Consistency of the mixed material= Flow able
Colour= Dark brownish grey
Pot life at 25° C= Approx 10 minutes
Mixed density =1.90 -2.00 gm/cc at 30°C
Compressive strength @30°C
((BS6319 Part2: 1983))
3 hrs.: Minimum 30 N/mm2
7 days: Minimum 60 N/mm2
Minimum curing required before loading and above at 30°C 3hrs and above at 20°C 8 Hrs

Advantages:

  • Rapid Strength gain
  • Corrosion resistant
  • Non-expansive
  • Can be applied even underwater
  • Good thixotropy consistency
  • Vibration resistant

Uses:

  • Rock bolting (in tunnels etc.)
  • Fixing of foundation bolts
  • Fixing of reinforcement

STONE GROUT ANCH-V

STONE GROUT ANCH-V is polyester based three component resin system specially made to give excellent anchorage .
Property : Description =Two components preweight system
Consistency of the mixed material= Flow able
Colour= Dark brownish grey
Pot life at 25° C= Approx 10 minutes
Mixed density =1.90 -2.00 gm/cc at 30°C
Compressive strength @30°C
((BS6319 Part2: 1983))
3 hrs.: Minimum 30 N/mm2
7 days: Minimum 60 N/mm2
Minimum curing required before loading and above at 30°C 3hrs and above at 20°C 8 Hrs

Advantages:

  • Rapid Strength gain
  • Corrosion resistant
  • PNon-expansive
  • Can be applied even underwater
  • Good thixotropy consistency
  • Vibration resistant

Uses:

  • Rock bolting (in tunnels etc.)
  • Fixing of foundation bolts
  • Fixing of reinforcement

EXPANDING AND INJECT. GROUT

STONE GROUT EGA

ArmGrout ADD is a specially formulated grouting aid.A single pack powder grout additive which when added to cement produces a free flow non-shrink grout.
Property : Form: Powder
Color: Yellowish Brown
Properties:
Unrestrained Expansion: Maximum up to 6 % Time of expansion at 20 ºC: 10 minutes - 2 hrs.

Advantages:

  • Free flow
  • Excellent adhesion
  • Non-expansive
  • Higher fluidity
  • Gaseous expansion
  • Compensates plastic shrinkage in cement

Uses:

  • Ideally designed for injection grouting and in-filling where a non-shrink free flow filling is required.
  • Best for grouting of weak concrete structures, honey combed areas, voids etc.

CRETOXY IG-LOW

Low viscous epoxy resin injection Grouting material.CRETOXY IG-LOW is a two part epoxy resin system for grouting gaps ranging from 0.3 mm to 10 mm.
Property : Pot life: - (FIP 5.1)Ambient temperature
affects the time for which bulk material will remain fluid
at 20C=60 minutes
at 30C=30 minutes
Mixed density (Gm/cc) (IS 9162)= Approx.1.06
Compressive strength (N/mm²) (IS 9162)
3 day:= Approx. 30
7 day:= Approx. 65
Tensile strength @7 day (N/mm2) (IS 9162) =Approx.15
Flexural strength @7 day (N/mm²) (IS 9162)= Approx. 30

Advantages:

  • Moisture insensitive
  • Low creep characteristics
  • High compressive, tensile and flexural strengths
  • Fast, convenient pumping
  • With stands a wide range of chemicals

Uses:

  • This is the most ideal product for repairs and rehabilitation of structures showing hair line cracks.
  • It is used to fill up cracks in roof slabs and other areas to make them structurally sound

GROUT ADMIX.

STONEMIX GT

Polymer Grout Admix designed for use with STONE FILL CEM/SANDED Series Grout,
Property : Pot Life =1 hour
Time to Foot Traffic=24 hours
Time to Heavy Traffic=72 hours
Wet Density=1730 kg/m3

Advantages:

  • Makes the cement grouts:
  • Weather resistant
  • Colour fast
  • Easy application and clean up.
  • Easy maintenance
  • Non-cracking & Non-shrink
  • Water and shock resistant.
  • Improves flexibility and durability of grout

Uses:

  • Used in place of water, STONEMIX GT Grout Admix Plus improves the performance of Portland cement grouts.
  • Designed for interior and exterior floor and wall joints of all types of ceramic tile, vitreous, semi-vitreous tile, glass mosaic tiles, terrazzo, brick, marble, natural stone and agglomerate stone installation.