Sealant Product

CRETOSEAL TAPE JOINT

CRETOSEAL TAPE JOINT is a new type of composite material, expandable, tensile, stable, waterproof but allows intrusion of water vapour diffusion pores.
Basis =Binding material Fleece - membrane-fleece
Colou=r White
Thickness= 0.3 mm
Allowance of Initial movement=Max. 30% of the joint width Composite gripping
Tension= At least 0.5 N/mm2
For designed Areas with =Inner corners of 12 cm at 900C =Outer corners of 12 cm at 90°C

Uses:

• For the waterproofing of expansion and dilatation joints in sealing layers.

CRETOSEAL TAPE JOINT-S

CRETOSEAL TAPE JOINT S is a new type of composite material, expandable, tensile, stable, waterproof but allows intrusion of water vapour diffusion pores
Basis= Binding material = Fleece - membranefleece
Colour= White
Thickness= 0.5 mm
Allowance of Initial movement =Max. 100% of the joint width Composite gripping
Tension =At least 0.5 N/mm2
Water Permeability =Approx. 2 to 4m
For designated Areas with Inner corners of 20 cm at 45° Outer corners of 20 cm at 45°
Areas with
Inner corners of 20 cm at 45°
Outer corners of 20 cm at 45°
Inner corners of 20 cm at 90°
Outer corners of 20 cm at 90°

Uses:

• For the waterproofing of expansion and dilatation joints in swimming pools, park decks and soiled earth areas.

CERTOSEAL TAPE BOND

Two Component Resin-Based, Thixotropic, Multipurpose Adhesive
Basis= 2-components epoxy-resin
Color= Component A: off white
Color= Component B: dark grey
Mixed product =Grey
Viscosity =Trowel able consistency
Density at 25°C =Approx. 1.55 g/ml
Mixing Ratio =3:1 parts by weight
Pot life:at 25°C =60 min.
Adhesive open time at 25°C =90 min.
Overcoat after at 25°C =16 h
Full cure: =7 days
Light traffic/full load after at 25°C =48 h/7 days
Tensile adhesion strength concrete failure= > 1.5 N/mm2
Shear Strength= 10 N/mm2
Flexural strength (7 days)= 15 N/mm2
Compressive strength (7 days)= 50 N/mm2

Advantages:

• Easy to mix, apply & clean
• High early & final compressive, flexural & tensile strengths
• Excellent bonding strength to all concrete surfaces
• Resistant to many dilute acids, alkalis and solutions aggressive to concrete
• Bonds to dry substrates
• Bonds to many substrates such as concrete, mortar & steel
• Two-color coded components indicate mixing homogeneity once achieved
• For horizontal, vertical and overhead application
• Hardens without shrinkage
• Excellent abrasion resistancec
• Innocuous once cured

Uses:

• CRETOSEAL TAPE BOND is a multipurpose, structural adhesive typically used for: Structural bonding of pre-cast elements such as segmental bridge units, crash barriers, parapets, curbs etc.
• Fixing dowels and starter bars
• Blow hole filling
• Levelling undulated surfaces
• Filling and sealing of static cracks
• Fixing surface injection packers
• Bonding carbon fiber wrap to concrete surfaces

CRETOSEAL PS-G

Two Part Ploysulphide Sealant, Gun Grade

Advantages:

• UV Resistant
• Good Weather ability
• Flame and fuel resistant
• Excellent Flexibility and movement tolerance
• Good resistance to chemicals and hydrocarbons

Uses:

•  Sealing of expansion, contraction & construction joints in building structure such as Basements, subways, retaining walls, floors, external walls, roof terraces & ceilings especially structural expansion joint running through the ceiling.
• Sealing of dynamic structural cracks
• Sealing of water retaining structure joints such as Water tank, reservoir, dams, canals, and water treatment plant
• Sealing of joints in traffic areas such as Bridges, roads and car parking areas

CRETOSEAL PS-P

Two Part Ploysulphide Sealant, Pouring Grade

Advantages:

• UV Resistant
• Good Weather ability
• Flame and fuel resistant
• Excellent Flexibility and movement tolerance
• Good resistance to chemicals and hydrocarbons.

Uses:

•  Sealing of expansion, contraction & construction joints in building structure such as Basements, subways, retaining walls, floors, external walls, roof terraces & ceilings especially structural expansion joint running through the ceiling.
• Sealing of dynamic structural cracks
• Sealing of water retaining structure joints such as Water tank, reservoir, dams, canals, and water treatment plant
• Sealing of joints in traffic areas such as Bridges, roads and car parking areas

CRETOSEAL PS-PRIME

Polysulphide Sealant primer
Appearance Clear transparent =liquid
Specific Gravity at 30C 0.=95 ± 0.05
Surface dry time,min= 20 - 30
Sealant application time after application of primer,min=30
Number of coats required 2

Advantages:

• Excellent adhesion to concrete and metal surfaces
• High performance: works to tensile or shear straight, or both
• Very easy to apply
• Eco- friendly - Does not content solvent.
• Non shrink in nature

Uses:

• Primer for polysulphide sealant.
• Enhance the bonding of polysulphide sealant with the substrate

CERTOSEAL PU FLEX G/W

SealArm PU Flex is a one component
Basis Single component polyurethane sealant (moisture curing).
Color= White & Grey
Density= Approx. 1.30 + 0.1 g/ml
Shore-A-hardness =Approx. 25
Slump resistance =Very good
Tensile strength =Approx. 1.20 Mpa (at 100% elongation)
Elongation %= Approx. 200 %
Tear strength= Approx. 7 Kg/cm²
Movement accommodation= 25%
Sag= Non Sag
Max. joint width= 30 mm
Min. joint width= 10 mm
Min. depth =8 mm
Application temperature =+10°C to +40°C (substrate)
Temperature resistance= -40°C to +80°C
Skin formation: after approx =50 minutes@ 27°C

Advantages:

• Single component – minimizes wastage
• Easy to apply
• Light and UV stable characterized by high elasticity. Possesses good resistance to dilute acids and alkalies, salt solutions, neutral waterbased cleaners as well as hot oils and fats.

Uses:

• SealArm PU Flex is used as a joint sealant for floor joints in heavy duty areas e.g. industrial areas, breweries, dairies, commercial kitchens, balconies, terraces as well as between concrete elements. It seals expansion and control joints, pre-cast concrete panel joints, window perimeters, steps, risers, roof and tilt wall joints.