Cretestone

Home Adhesive

Adhesive Product

About Adhesive Products

TILE ADHESIVE

STONEFIX 35 SUPER

Multipurpose partially light weight highly polymer modified and highly flexible adhesive
Working Properties : Table :
Open Time:40-45 minutes
Adjustability Time:40-45 minutes
Pot Life:4-5 hours
Time to foot Traffic:16-24 hours

Advantages:

  • Light weight formula- 15% higher coverage than standard adhesive
  • High strength with high polymer modification
  • Extended open time
  • Non sag & non slump formula for large format tiles in wall and floor systems
  • Good resistance against crack propagation
  • Good impact resistance- provides cushion effect to tiles
  • Exceeds ANSI A118.4 shear bond strength requirements
  • Complies with EN / ISO with a C2TES1 classification.
  • Exceeds IS 15477 – Type 3/TS1 Adhesive standards.

Substrates:

  • 1.MIVON Concrete, VD F, Precast concrete
  • 2.Cement Mortar Beds
  • 3.Ceramic tile, Vitrified Tile and Natural Stone
  • 4.Glass mosaic tile
  • 5.Brick Masonry
  • 6.Cement Terrazzo
  • 7.Calcium Silicate Board** (For dry
  • 8.Gypsum Wallboard** (For dry

STONEFIX 54

Very High polymer modified thinset adhesive with high flexibility for fixing large format tiles and stones on interior and exterior floor & wall
working properties : table :
Open Time=35 minutes
Adjustability Time : 40 minutes
Pot Life : 4 hours
Time to Heavy Traffic : 16 - 24 hours

Advantages:

  • Single component, just add water
  • High strength, polymer modified
  • Economical & Easy to use
  • Bonds to various substrates
  • Exceeds ANSI A118.4 shear bond strength requirements
  • Complies with EN / ISO with a C2TES1 classification.
  • Exceeds IS 15477 – Type 2 Adhesive standards.
  • Water and shock resistant.

Sustrates:

  • Concrete and concrete Mesonry
  • MIVON Concrete, VDF, Tremix Concrete
  • Cement Mortar Beds
  • Cement Plaster
  • Ceramic tile, Vitrified Tile and Natural Stone
  • Calcium Silicate Board**
  • Brick Masonry
  • Cement Backer Board**
  • Cement Terrazzo
  • Natural Stone
  • Cement Backer Board**
  • Consult the backer board manufacturer's data sheet for the specific recommendations and load bearing capacity of specific board intended for use.

STONEFIX 36

Multipurpose highly polymer modified thinset adhesive for fixing large format tiles and stone on interior and exterior floor & wall.
working properties : table :
Open Time=20 minutes
Adjustability Time : 30 minutes
Pot Life : 50 Minutes
Time to Foot Traffic : 4-6 hours

Advantages:

  • Single component, just add water
  • Fast setting, polymer modified
  • Economical & Easy to use
  • Bonds to various substrates
  • Exceeds ANSI A118.4 shear bond strength requirements
  • Complies with EN / ISO with a C2FT classification.
  • Exceeds IS 15477 – Type 2 Adhesive standards.
  • Water and shock resistant.

Substrates:

  • Concrete and concrete Mesonry
  • MIVON Concrete, VDF, Tremix Concrete
  • Cement Mortar Beds
  • Cement Plaster
  • Ceramic tile, Vitrified Tile and Natural Stone
  • Calcium Silicate Board**
  • Brick Masonry
  • Cement Backer Board**
  • Cement Terrazzo
  • Natural Stone
  • Cement Backer Board**
  • Consult the backer board manufacturer's data sheet for the specific recommendations and load bearing capacity of specific board intended for use.

STONEFIX 35

Multipurpose highly polymer modified thinset adhesive for fixing large format tiles and stone on interior and exterior floor & wall.
working properties : table :
Open Time=30 minutes
Adjustability Time : 30 minutes
Pot Life : 4 Minutes
Time to Heavy Traffic : 16-24 hours

Advantages:

  • Single component, just add water
  • High Strength, polymer modified
  • Economical & Easy to use
  • Bonds to various substrates
  • Exceeds ANSI A118.4 shear bond strength requirements
  • Complies with EN / ISO with a C2TES1 classification.
  • Exceeds IS 15477 – Type 2 Adhesive standards.
  • Water and shock resistant.

Substrates:

  • Concrete and concrete Mesonry
  • MIVON Concrete, VDF, Tremix Concrete
  • Cement Mortar Beds
  • Cement Plaster
  • Ceramic tile, Vitrified Tile and Natural Stone
  • Calcium Silicate Board**
  • Brick Masonry
  • Cement Backer Board**
  • Cement Terrazzo
  • Natural Stone
  • Cement Backer Board**
  • Consult the backer board manufacturer's data sheet for the specific recommendations and load bearing capacity of specific board intended for use.

STONEFIX 52

High polymer modified thinset adhesive for fixing tiles and stone on interior and exterior floor & wall.
working properties : table :
Open Time=30 minutes
Adjustability Time : 30 minutes
Pot Life : 4 Hours
Time to Heavy Traffic : 16-24 hours

Advantages:

  • Single component, just add water
  • High Strength, polymer modified
  • Economical & Easy to use
  • Bonds to various substrates
  • Exceeds ANSI A118.4 shear bond strength requirements
  • Complies with EN / ISO with a C2TE classification.
  • Exceeds IS 15477 – Type 2 Adhesive standards.
  • Water and shock resistant.

Substrates:

  • Concrete and concrete Mesonry
  • VDF / Tremix Concrete
  • Cement Mortar Beds
  • Cement Plaster
  • Ceramic tile, Vitrified Tile and Natural Stone
  • Calcium Silicate Board**
  • Brick Masonry
  • Cement Backer Board**
  • Cement Terrazzo
  • Natural Stone
  • Cement Backer Board**
  • Consult the backer board manufacturer's data sheet for the specific recommendations and load bearing capacity of specific board intended for use.

STONEFIX 90

High polymer modified thinset adhesive for fixing tiles and stone on interior and exterior floor & wall.
working properties : table :
Open Time=20 minutes
Adjustability Time : 20 minutes
Pot Life :3-4 Hours
Time to Heavy Traffic : 16-24 hours

Advantages:

  • Single component, just add water
  • High Strength, polymer modified
  • Economical & Easy to use
  • Bonds to various substrates
  • Exceeds ANSI A118.4 shear bond strength requirements
  • Complies with EN / ISO with a C1TE classification.
  • Exceeds IS 15477 – Type 2 Adhesive standards.
  • Can be fortified with latex admix for external use.

Substrates:

  • Concrete
  • Concrete Mesonry
  • Cement Mortar Beds
  • Cement Plaster
  • Existing Vitrified Tile* & Ceramic Tile*
  • Brick Masonry
  • Cement Terrazzo
  • Existing Natural Stone*
  • Surface to be cleaned and roughened before installation of tiles or stones.

STONEFIX 07

Polymer based thinset adhesive for fixing small to medium format ceramic tiles and small format stone on interior floor & wall.
working properties : table :
Open Time=20 minutes
Pot Life :3-4 Hours
Time to Heavy Traffic : 16-24 hours

Advantages:

  • Single component, just add water
  • High Strength, polymer modified
  • Economical & Easy to use
  • Bonds to various substrates
  • Exceeds ANSI A118.4 shear bond strength requirements
  • Complies with EN / ISO with a C1T classification.
  • Exceeds IS 15477 – Type 1 Adhesive standards.
  • Can be fortified with latex admix for external use.

Substrates:

  • Concrete
  • Concrete Mesonry
  • Cement Mortar Beds
  • Cement Plaster
  • Existing Vitrified Tile* & Ceramic Tile*
  • Brick Masonry
  • Cement Terrazzo
  • Existing Natural Stone*
  • Surface to be cleaned and roughened before installation of tiles or stones.

STONEFIX 05

Polymer based thin-set adhesive for fixing ceramic tiles and small format stone on interior floor & wall.
working properties : table :
Open Time=20 minutes
Pot Life :2-3 Hours
Time to Heavy Traffic : 16-24 hours

Advantages:

  • Single component, just add water
  • High Strength, polymer modified
  • Economical & Easy to use
  • Bonds to various substrates
  • Exceeds ANSI A118.4 shear bond strength requirements
  • Complies with EN / ISO with a C1T classification.
  • Exceeds IS 15477 – Type 1 Adhesive standards.
  • Can be fortified with latex admix for external Tile and Stone installations.

Substrates:

  • Concrete
  • Concrete Mesonry
  • Cement Mortar Beds
  • Cement Plaster
  • Existing Vitrified Tile* & Ceramic Tile*
  • Brick Masonry
  • Cement Terrazzo
  • Existing Natural Stone*
  • Surface to be cleaned and roughened before installation of tiles or stones.

EPOXY ADHESIVE

CRETOXY EA-3

three components, Epoxy thinset adhesive for fixing tiles and stone on interior and exterior floor & wall. Suitable for industrial, commercial and residential areas, where high chemical resistance is required.
PROPERTY=TYPICAL VALUES
Mixing Ratio- A : B: C (By weight)=1 : 2.5 : 10
Specific Weight of the Mixture=1600-1700 kg/m3
Pot Life=45 Minutes

Advantages:

  • Non flammable, water cleanable when fresh.
  • High strength, chemical resistant
  • Prevents curling of moisture sensitive marbles and agglomerated tiles & stones
  • Bonds to various substrates including metals
  • Complies to ANSI A 118.3
  • Complies to EN/ISO with a R2 classification.
  • Complies to IS 15477 as Type 2 Adhesive
  • Water, freezing, thermal shock resistant
  • Does not stain white or light coloured marbles.

Substrates:

  • Concrete – VDF, Tremix and MIVON
  • Concrete Masonry & Brick Masonry
  • Cement Mortar Beds & Plaster
  • Metal floors and walls
  • Tile and Stone
  • Wood & Plywood**
  • Cement Terrazzo
  • Cement Backer Board** & Gypsum board**
  • Engineered stones & Marbles
  • Epoxy resin based substrates
  • Rubber, PVC and Linoleum substrates
  • **Consult the backer board manufacturer's data sheet for the specific recommendations and load bearing capacity of specific board intended for use.

CRETOXY EA-2

Two component, high strength epoxy adhesive for installation of tiles/stone veneers, wood and metals on different substrates that meets and exceeds the requirements of international standards.
PROPERTY=TYPICAL VALUES
Mixing Ratio- A : B (By weight)=1 : 1.5
Specific Weight of the Mixture=1550-1650 kg/m3
Pot Life=60 - 90 Minutes

  • • High strength, shock & impact resistant.
  • Versatile- Interior and Exterior areas, walls & ceilings
  • Easy to use.
  • Economical – saves time and money.
  • Complies to EN/ISO with a R2T classification.
  • Complies to ANSI A 118.3

Substrates:

  • Concrete – VDF, Tremix and MIVON
  • Concrete Masonry & Brick Masonry
  • Cement Mortar Beds & Plaster
  • Metal floors and walls
  • Tile and Stone
  • Wood & Plywood**
  • Cement Terrazzo
  • Cement Backer Board** & Gypsum board**
  • Engineered stones & Marbles
  • Epoxy resin based substrates
  • Rubber, PVC and Linoleum substrates
  • **Consult the backer board manufacturer's data sheet for the specific recommendations and load bearing capacity of specific board intended for use.

CRETOXY EA-S

CRETOXY EA-S Stone Adhesive is a two component, high strength epoxy adhesive, which is formulated for the spot bonding method of tile and stone installations on vertical surfaces. CRETOXY EA-S Stone Adhesive maintains its non-sag consistency at high temperatures up to 35°C.
PROPERTY= TYPICAL VALUES
Mixing Ratio- A : B ( By weight)= 1 : 1
Specific Weight of the Mixture= 1750-1875 kg/m3
Consistency Thick Paste- No sag in thickness=1''(25mm)
Set Time @ 21 C= 5-6 hours
Set Time @ 25 C= 4-5 hours
Pot Life @ 21C= 40 -50 min
Pot Life @ 25 C= 25-35 min

  • Fast Permanent Bond—45 minutes to 1 hour set time.
  • Easy to Use—1:1 mixing ratio.
  • Non-Staining —ideal for white and light colored marbles,other stones and tiles.
  • Withstands shock and vibration.
  • Durable permanent bond, will not deteriorate over time.
  • Safe—no solvents.
  • Non-Sag—when applied up to 1" (25 mm) thick.
  • Rapid version is available; 5–8 minute set up.
  • Approved by the following building code bodies for exterior i nstallations: ICC, IBC.
  • Conforms to EN 12004 and ISO 13007 with a classification of R2T

Substrates:

  • Concrete
  • Concrete Masonry Unit
  • Brick/masonry
  • Exterior glue plywood
  • Cement backer board*
  • Steel**
  • Consult cement backer board manufacturer for specific installation recommendations.
  • Steel surface must be cleaned to remove oil, dust oxidation and other bond inhibiting materials.
  • NOTE: 1. Concrete - Must be minimum 6" (150 mm) thick reinforced - Must be minimum 3500 psi (24 MPa) - Must be minimum 28 days old prior to installation 2.CMU - Double Wythe walls only

PU ADHESIVE

STONFIX PUA

two component, Polyurethane thinset adhesive for fixing tiles and stone on interior and exterior floor & wall. Suitable for various drywall substrates including metals.
Appearance=Off white after mixing
Mixed Density=1650 - 1720 Kg/ m3..
Shelf life=12 Months when stored under standard conditions
Application temperature=12° C to 40° C
Pot life=60 – 75 minutes
Open time=60 minutes
Adjustability=60 minutes
Vertical slip=< 0.5 mm
Foot traffic=24 hours
Grouting=24 hours
Interval before normal use=3 days

FEATURES AND BENEFITS:

  • Two components, just mix and use.
  • High strength, chemical resistant
  • Economical & Easy to use
  • Bonds to various substrates including metals
  • Complies to EN/ISO with a R2T classification.
  • Water, freezing, thermal shock resistant
  • Flexible and heat resistant.

Substrates:

  • Concrete – VDF, Tremix and MIVAN
  • Concrete Masonry & Brick Masonry
  • Cement Mortar Beds & Plaster
  • Metal floors and walls
  • All types of Tile and Stone
  • All types of Wood & Plywood**
  • All types of Plaster board / Cement Backer Board*
  • Gypsum board*
  • Cement Terrazzo/li>
  • Epoxy or PU resin based substrates
  • WPC (Wood Polymer Composite board)*
  • Rubber, PVC and Linoleum substrates
  • *Consult the backer board manufacturer's data sheet for the specific recommendations and load bearing capacity of specific board intended for use.

STONEFIX DWA

Open Time=30 minutes
Adjustability Time=20 minutes
Pot Life=4 hours
Time to Foot Traffic=24 hours

FEATURES AND BENEFITS:

  • Single component, just open and use.
  • High strength.
  • Economical & Easy to use
  • Bonds to various substrates
  • Exceeds ANSI A118.4 shear bond strength requirements
  • Complies with EN / ISO with a D2TE classification.
  • Water and shock resistant.

Substrates:

  • Concrete* & Concrete Masonry*
  • MIVON Concrete*, VDF*, Tremix Concrete*
  • Cement Mortar Beds* & Cement Plaster*
  • AAC Block Masonry Walls*
  • Ceramic tile, Vitrified Tile and Natural Stone
  • Plywood board**
  • Gypsum Wall board**
  • Cement Backer Board**
  • Cement Terrazzo*
  • Calcium Silicate Board**
  • Other resilient tile and stone
  • All cement based surfaces should have been cured as per standard practices and shall be dry for tiling
  • Consult the backer board manufacturer's data sheet for the specific recommendations and load bearing capacity of specific board intended for use.
  • NOTE: Not for use on Metallic and Plastic substrates and for metallic tiles.

BLOCK ADHESIVE

STONEFIX AAC BLOCK

STONEFIX AAC Block Adhesive is a factory prepared blend of carefullyselected raw materials, Portland cement and gradedaggregates and polymers. Designed for use with water toproduce high strength thixotropic mortar, for laying AeratedLight weight concrete, Fly ash bricks, cement hollow blocks,Cellular concrete blocks or smoothing over the block work surface in layers of up to 12mm thickness, that meet and exceed the requirements of National and International Standards.
Pot Life =1 Hour
Open Time =30 Minutes
Time to Plaster =24 hours
Time to full dry hard= 14 Days
Wet Density =1750 kg/m 3

FEATURES AND BENEFITS:

  • High Strength
  • No curing required after block work is done.
  • Flexible, shock & impact resistant
  • Improved adhesion between two blocks
  • improved bond strength, compressive & tensile strength
  • Thin jointing with high adhesion to contribute to load bearing capacity of masonry
  • easy to use
  • Long working time
  • Fast & economical

Substrates:

  • Concrete Blocks
  • Cement Mortar Blocks/Bricks
  • Concrete hollow blocks
  • Aerated Light weight blocks
  • Cellular concrete blocks
  • Fly Ash Bricks

MOSAIC ADHESIVE

STONEFIX 20

Polymer modified thick bed adhesive for fixing small to large format stones on interior and exterior floor.
Open Time=20 minutes
Adjustability Time=20 minutes
Pot Life=2 hours
Time to Heavy Traffic=16 - 24 hours

Advantages:

  • Single component, just add water
  • High strength, polymer modified
  • No lippage & Easy to use
  • Bonds to various substrates
  • Exceeds ANSI A118.4 shear bond strength requirements
  • Complies with EN 12004.
  • Exceeds IS 15477 – Type 2 Adhesive standards.
  • Can be used up to 40mm bed thickness.

Substrates:

  • • Concrete, Tremix concrete, VDF concrete
  • Precast concrete
  • Cement based screed
  • Gypsum based screed
  • Ceramic tile, Vitrified Tile and Natural Stone
  • Cement Backer Board**
  • Cement Terrazzo
  • Existing natural stone or tile surface
  • Consult the backer board manufacturer's data sheet for the specific recommendations and load bearing capacity of specific board intended for use.

STONEFIX 40

Highly polymer modified medium bed adhesive for fixing small to large format stones on interior and exterior wall.
Open Time=30 minutes
Adjustability Time=30 minutes
Pot Life=4 hours
Time to Heavy Traffic=16 - 24 hours

Advantages:

  • Single component, just add water
  • High strength, polymer modified
  • Non-sag & Easy to use
  • Bonds to various substrates
  • Exceeds ANSI A118.4 ET shear bond strength requirements
  • Complies with EN / ISO with a C2TES1 classification.
  • Exceeds IS 15477 – Type 2 Adhesive standards.
  • Can be used up to 15mm bed thickness.

Substrates:

  • Concrete& Concrete Masonry
  • MIVON Concrete, Precast concrete
  • Cement Plaster
  • Ceramic tile, Vitrified Tile and Natural Stone
  • Brick Masonry
  • Cement Backer Board**
  • Cement Terrazzo
  • Calcium Silicate Board**
  • Gypsum Wallboard**
  • Consult the backer board manufacturer's data sheet for the specific recommendations and load bearing capacity of specific board intended for use.