CRETOXY SFD PRIME is a two component epoxy based primer with good penetrating properties for concrete surfaces
Uses:
- Improves the adhesion of epoxy floor toppings and epoxy mortars with the substrate
Substrates:
- It is suitable for priming concrete surfaces prior to the application of any of the CRETOXY SL and SC range of resin based floor toppings, CRETOXY TCS-1 & TC-1 range of protective coatings or Dupoxy Putty repair mortars.
CRETOXY SFW PRIME is a two component epoxy based primer with good penetrating properties for concrete surfaces
Uses:
- Can be applied even on damp moist surfaces.
- Improves the adhesion of epoxy floor toppings and epoxy mortars with the substrate.
Substrates:
- It is suitable for priming concrete surfaces prior to the application of any of the CRETOXY SL,SC,TCS,TC range of resin based floor toppings, CRETOXY range of protective coatings or CRETOXY Putty for repair mortars.
CRETOXY Coating TC-1 is a solvent free system based on epoxy resins and curing agents specially selected for their ability to withstand chemical attack . The system consists of pre- weighed base & hardener components and a CRETOXY colour pack, all of which contain reactive elements that are essential to the installation of the system.
Uses:
- Durable, low maintenance costs.
- Proven against a wide range of industrial chemicals.
- Solvent free - no odour during application.
- Slip resistant - different textures available to suit conditions to avoid slipping. Liquid applied providing complete protection.
- Available in a wide range of colours to improve the working environment and identify slip hazard areas
Substrates:
- Production assembly areas.
- Workshops / Warehouses.
- Dairies / Food Processing Unit
- Soft drinks production and bottling plants.
- Light Industrial Plants.
- Showrooms / Hospital / Hotels.
CRETOXY Coating TCS-1 is a three-component high solids, epoxy resin coating system supplied in preweighed packs ready for on-site mixing and use.
Advantages:
- Very hard wearing - durable , low maintenance costs.
- High resistance of a wide range of industrial chemicals.
- Hygienic - Impervious finish provides easily cleaned surface.
- Attractive - Available in a range of colours to improve the working environment.
Uses:
- Production assembly areas
- Workshops / Warehouses.
- Dairies / Food Processing Unit
- Soft drinks production and bottling plants.
- Light Industrial Plants.
- Showrooms / Hospital / Hotels.
Flow applied, 0.5 - 1.5 mm thick, water based, damp-tolerant, epoxy resin floor topping
Advantages:
- Damp Tolerant - No application delays.
- Chemically resistant - Good resistance to a wide range of chemicals.
- Hygenic - Provides a dense, impervious, seamless floor surface which is easily cleaned.
- Attractive - Available in a wide range of colours to enhance the working environment.
- Durable - Good abrasion resistance.
Uses:
- Clean Rooms
- Dairies
- Soft drinks production facilities
- Chemical manufacturing plants.
- Plant Rooms.
- Light industrial plants.
Flow applied, 2 mm thick, epoxy resin based floor topping
Advantages:
- Damp Tolerant - No application delays.
- Chemically resistant - Good resistance to a wide range of chemicals.
- Hygenic - Provides a dense, impervious, seamless floor surface which is easily cleaned
- Attractive - Available in a wide range of colours to enhance the working environment.
- Durable - Good abrasion resistance.
Uses:
- Pharmateutical manufacturing unit.
- Dairies.
- Soft drinks production facilities.
- Chemical manufacturing plants.
- Plant Rooms / Warehouses.
- Light industrial plants.
- Laboratories
Flow applied, 3 mm thick epoxy resin based floor topping
Advantages:
- Damp Tolerant - No application delays.
- Chemically resistant - Good resistance to a wide range of chemicals.
- Hygenic - Provides a dense, impervious, seamless floor surface which is easily cleaned.
- Attractive - Available in a wide range of colours to enhance the working environment.
- Durable - Good abrasion resistance.
Uses:
- Pharmateutical manufacturing unit.
- Dairies.
- Soft drinks production facilities.
- Chemical manufacturing plants
- Plant Rooms / Warehouses.
- Light industrial plants.
- Laboratories
Heavy duty, flow applied 4 mm thick epoxy resin floor topping
Advantages:
- Damp Tolerant - No application delays.
- Chemically resistant - Good resistance to a wide range of chemicals.
- Hygenic - Provides a dense, impervious, seamless floor surface which is easily cleaned
- Attractive - Available in a wide range of colours to enhance the working environment.
- Durable - Good abrasion resistance.
Uses:
- Pharmateutical manufacturing unit.
- Dairies.
- Soft drinks production facilities.
- Chemical manufacturing plants.
- Plant Rooms / Warehouses.
- Light industrial plants.
- Laboratories
- Dry Food Process plants.
- Traffic aisles in factories or warehouses.
2 - 6 mm thick high strength, abrasion and impact resistant epoxy resin tough screed
Advantages:
- Durable - Exceptional Resistance to heavy duty traffic.
- Seamless - Eliminates potencial sources of failure.
- Easily Laid - Designed for easy laying to a fair finish
- Colour range - Available in different colour combinations.
- Nonslip - Good gripping surface to both vehicular and pedestrian traffic.
Uses:
- CRETOXY SC 2 provides an extremely high strength floor topping with exceptional resistance to surface mechanical wear and attack from chemical spillage. The trowelled screed has a safe nonslip finish.
- CRETOXY SC 2 is ideally suited for heavy engineering industry, paper and pulp industry, steelworks, breweries, automobile industry, tyre manufacturing industry, warehouses, trucking lanes, loading bays etc
Moisture Insensitive Epoxy Putty
Advantages:
- Exellent Impact resistance.
- Forms excellent bond on damp, dry and underwater surfaces.
- Stops the ingress of water.
- Excellent resistance to saline environment.
- Eliminates corrosion of steel and concrete structures even in marine condition
- Good mechanical properties.
Uses:
- Repair of patches in concrete before any Dupoxy coating or SL work.
- Sealing of cracks in concrete before any Dupoxy coating or SL work.
- Making up undulation of concrete surface before coating.
- Sealing of cracks both underwater and in dry conditions.
- Sealing of cracks in metal and wooden surfaces.
- Protection of concrete, steel, marine structures as protective coating at or below the water line.