•Basis Single component polyurethane sealant (moisture curing).
Color= White & Grey
Density= Approx. 1.30 + 0.1 g/ml
Shore-A-hardness =Approx. 25
Slump resistance =Very good
Tensile strength =Approx. 1.20 Mpa (at 100% elongation)
Elongation %= Approx. 200 %
Tear strength= Approx. 7 Kg/cm²
Movement accommodation= 25%
Sag= Non Sag
Max. joint width= 30 mm
Min. joint width= 10 mm
Min. depth =8 mm
Application temperature =+10°C to +40°C (substrate)
Temperature resistance= -40°C to +80°C
Skin formation: after approx =50 minutes@ 27°C .
Single component – minimizes wastage
Easy to apply
Light and UV stable characterized by high
elasticity. Possesses good resistance to dilute
acids and alkalies, salt solutions, neutral waterbased
cleaners as well as hot oils and fats.
• SealArm PU Flex is used as a joint sealant for floor joints in heavy duty areas e.g. industrial areas, breweries, dairies, commercial kitchens, balconies, terraces as well as between concrete elements. It seals expansion and control joints, pre-cast concrete panel joints, window perimeters, steps, risers, roof and tilt wall joints.